Removing E52 Gear Shift Selector Handle

If you need to replace the gear shift selector / knob then heres how you can do it. (Useful if you need to replace the aircon or media control units.)

IMPORTANT NOTE: You need to part on flat ground before starting this work.  The parking brake is not sufficient to hold the car if you are on a hill

1. Push down the Shift Lock button on the silver gear surround.  Use a plastic tool or something soft to avoid damaging the silver panel. 


2. While holding the Shift Lock move the gear shift selector to Neutral position

3. Lever down and unclip the silver base of the gear shift handle

4. Remove the pin from the gear shift handle

5. Now just pull the handle off the stick.  


6. I would recommend not moving the gear selector stick while you work on it.
 

Comments

Popular posts from this blog

E52 vs E51 Part 1: Is size important?

Elgrand E52 MPG - How bad is it really

English Stereo Replacement (Xanavi system)